The animation shows a typical flow control valve called a needle valve. You can see how the pointed stem will restrict the flow as it is turned down and increase the flow when it is turned up. This regulation of the flow, for example, could determine the speed at which a device will operate at.

Like all our other animations, our needle valve animation for introduction to hydraulics course is specifically written for the Oil and Gas and Energy Industry by our Industry SMEs. The Oilennium LMS allows you to administrate, document, track and report training programs, classroom and online events, e-learning programs, and training content.

For more information on our courses or if you have any further enquiries then please email Sam O’Hara

Employers and employees have basic duties concerning the provision and use of PPE at work and this course, explains what you need to do to meet the requirements of the Personal Protective Equipment at Work Regulations 1992 (as amended).

Like all our other courses, our PPE course is specifically written for the Oil and Gas and Energy Industry by our Industry SMEs. The Oilennium LMS allows you to administrate, document, track and report training programs, classroom and online events, e-learning programs, and training content. This allows you to:

1. Centralize and automate administration.
2. Use self-service and self-guided services.
3. Assemble and deliver learning content rapidly.
4. Consolidate training initiatives on a scalable web-based platform.
5. Support portability and standards.
6. Personalize content and enable knowledge reuse.

For more information on our courses or if you have any further enquiries then please email Sam O’Hara

Wissam studied and obtained his Master Degree in Computer Engineering at the University of Basra, Iraq and continued his career with the University taking up the position of ICT Computing Labs Instructor before moving on to gain experience at South Refineries Co. – Ministry of Oil, Iraq.

Wissam settled in Norfolk in order to continue his studies and joined the University of East Anglia Graduate Internship Programme in order to utilise the skills he has developed throughout his career and gain further experience within an eLearning environment.

Oilennium, based in Loddon, has successfully developed online interactive elearning course, onsite classroom courses, Learning Management Systems and equipment specific simulators for the energy industry for over three years and has experienced rapid growth and development.

Sam O’Hara, Commercial Manager, said “The Internship provides our IT department with additional experience and we will be working with Wissam as we develop a robust I.T. development business plan to support the rapid expansion of the company, we are delighted to have Wissam come on board and look forward to working with him in the coming weeks”.

For more information on our courses or if you have any further enquiries then please email Sam O’Hara

• PPE: Personal Protective Equipment
• COSHH: Control Of Substances Hazardous to Health
• Slips, Trips and Falls
• Safety Observation
• Display Screen Equipment
• Introduction to Hydraulics

For more information on our courses or if you have any further enquiries then please email Sam O’Hara

Manual Handling elearning Training Course for Oil & Gas industry

At the end of the course you will be able to define Manual Handling, explain why awareness is important and how to avoid injury, demonstrate how to lift correctly and be able to successfully assess lifting operations.

There are several reviews throughout the course, and a scenario based review to test your learning to finish.

Course Content

The course takes approximately 20 mins to complete and is followed by a confirmation screen to confirm your understanding, a certificate will be then be awarded.

Introduction and Complying with the Rules

These chapters deal with why these safety rules are important and some of the consequences of not abiding by them..

The 12 Rules

The 12 rules are presented in a clear to understand format.

Intervene

This chapter discusses scenarios in which it is appropriate to intervene if witnessing breaches of the safety rules.

Disciplinary Action

Failing to follow the safety rules has consequences, this chapter outlines some of the disciplinary actions in place that act as a deterent to breaking those rules.

Home and Safe, Summary and Induction Complete

These last three chapters enforce the importance of the client to the safety of it’s staff and ends with a screen to confirm the student has read and understood the content.

Course Content

The PUWER course takes approximately 30 mins to complete and is followed by a 10 question test to reinforce your learning, get 8 or more questions correct to earn a certificate.

Introduction to PUWER

This introductory chapter explains some workplace regulations to be aware of, defines PUWER and how it fits into the workplace, with regards to suitability, maintenance, inspection, risks and hazards.

This chapter covers PUWER and it’s relationship to Control Systems that need to be in place before certain types of equipment can be used.

Mobile Work Equipment

Mobile Work Equipment has it’s own specific set of regulations, this chapter describes this part of PUWER and gives real life examples of some classic breaches.

Power Presses

This chapter outlines PUWER with regard to Power Presses.

MUSIC

This acronym can be used to remember the important points of PUWER. In this chapter we look at the main points of Maintenance, Usage, Suitaility, Inspection and Competency and it’s application in the workplace.

Case Studies and Pictures

Using some real life examples this chapter goes into more specific detail of some of the more important areas of PUWER in the workplace.

Course Content

The course takes approximately 45 mins to complete and is followed by a 15 question test to reinforce your learning, a certificate will be awarded for 80% or more correct answers.

About Pigs

This chapter will give you a background in Pigs. It will go into the different functions, designs and parts of this versatile piece of equipment.

Pigging Equipment

This chapter describes the different types of Pig traps and their different uses.

The Pigging Process

This chapter details: loading a Pig, launching a Pig, tracking a Pig, receiving a Pig and unloading a Pig. It also touches in safety issues as a precursor to the next chapter.

Pigging Safety

This final chapter elaborates on safety issues relating to the Pigging process briefly touched on in the previous chapter. It details such issues as trapped pressure and the potential results and also additional Personal Protective Equipment that can be useful when working with Pigs.

Course Content

The course takes approximately 45 mins to complete and is followed by a 15 question test to reinforce your learning, a certificate will be awarded for 80% or more correct answers.

Understanding the Pump Layout

This chapter explains the basic functions of the HT400 using pictures to illustrate where such things as the control panel, oil filter and air inlet etc are located.

Understanding the AMOT System

From this chapter you should gain an understanding of how the engine protection system works by monitoring the oil pressure, running speed or coolant temperature of the running machine and the conditions under which it will safely shutdown.

 
HT400 Pump Operation

This chapter will take you through the full cycle of operation; from rigging up, through pre-start checks, starting, checks during operation to shutting the unit down again.

Maintenance

As with any piece of machinery there are basic tasks, that do not need a qualified mechanic, that will improve the performance and life of the HT400. This chapter will take you through engine, pump and transmission maintenance.

Troubleshooting

Like maintenance, some troubleshooting can be done without the need for a mechanic. This chapter will take you through some of the simple fixes you can apply to problems.